FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix Honda Civic 10th Generation (2016-2021) rear brakes dragging - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/how to fix Honda Civic 10th Generation (2016-2021) rear brakes dragging

how to fix Honda Civic 10th Generation (2016-2021) rear brakes dragging

Honda Civic 11th Generation (2022-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
537 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix dragging rear brakes on Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms, tools, and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always disconnect the battery before working on the braking system.
  • •Allow the brakes to cool before touching any components after driving.

Symptoms

  • •Increased brake pedal effort required
  • •Overheating of rear brake components
  • •Unusual noise when brakes are applied (squeaking or grinding)
  • •Uneven tire wear on the rear tires
  • •Vehicle pulling to one side during braking

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Lug wrench
  • •Brake cleaner
  • •Torque wrench
  • •Bungee cord or wire

Parts Required

  • •New brake pads (if worn)
  • •New brake rotors (if warped or scored)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Ensure the vehicle is on a flat surface and securely lift it with jack stands.
  • Disconnect the negative battery terminal to ensure safety.
2. Remove Rear Wheel
  • Use a lug wrench to loosen the lug nuts on the rear wheel.
  • Raise the vehicle with a jack and secure it with jack stands.
  • Fully remove the lug nuts and take off the rear wheel.
3. Inspect and Clean Brake Components
  • Remove the brake caliper by unbolting it with a socket set (usually 12mm or 14mm bolts).
    • Tool Required: Socket set
  • Support the caliper using a bungee cord or wire to avoid stress on the brake line.
  • Check the brake pads for even wear; replace if worn unevenly.
  • Clean the caliper slides and bracket with brake cleaner to remove any rust or debris.
4. Replace or Adjust Components
  • Inspect the brake rotor for any warping or scoring; replace if necessary.
    • Parts Required: New brake pads and rotors (if needed)
  • If the parking brake mechanism is sticking, adjust or lubricate it as needed.
  • Ensure caliper slides move freely; apply brake grease as necessary.
5. Reassemble and Test
  • Reinstall the brake caliper and torque bolts to manufacturer's specification (usually around 25-30 ft-lbs).
  • Reinstall the rear wheel and torque lug nuts to the manufacturer's specification (typically 80-100 ft-lbs).
  • Reconnect the negative battery terminal.