how to fix a Honda Civic 10th Generation (2016-2021) that has a rough engine noise?

Honda Civic 11th Generation (2022-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

552 words

Problem Statement

Learn how to diagnose and fix rough engine noise in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems
•Allow engine to cool before opening oil drain plug to avoid burns

Symptoms

•Rough engine noise during idle and acceleration
•Increased engine vibrations felt in the cabin
•Check engine light illuminated
•Decreased power and acceleration
•Possible oil leaks or burning smell

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Perform a visual inspection of the engine bay for any obvious signs of wear, loose components, or leaks
3
Check engine oil level and condition to ensure it is at the proper level and not contaminated
4
Inspect the exhaust system for leaks, which could cause abnormal noise
5
Listen for the noise at different RPMs to determine if it changes under load or acceleration
6
Check all engine mounts for signs of wear or failure that could contribute to vibrations and noise

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Wrenches
•Torque wrench
•Oil filter wrench
•Safety goggles
•Gloves

Parts Required

•Engine oil (0W-20)
•Oil filter
•Engine mounts (if needed)
•Serpentine belt (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Perform a visual inspection of the engine bay for any obvious signs of wear, loose components, or leaks
3
Check engine oil level and condition to ensure it is at the proper level and not contaminated
4
Inspect the exhaust system for leaks, which could cause abnormal noise
5
Listen for the noise at different RPMs to determine if it changes under load or acceleration
6
Check all engine mounts for signs of wear or failure that could contribute to vibrations and noise

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Tools Required: OBD-II scanner, socket set, wrenches, torque wrench, engine oil, oil filter, safety goggles, gloves.

2. Address Engine Oil Issues

Sub-steps:
1. Check Oil Level: Remove the dipstick, wipe clean, reinsert, and check oil level.
2. Change Oil: If oil is dirty or low, drain the old oil using a wrench to remove the drain plug.
3. Replace Oil Filter: Use an oil filter wrench to remove the old filter, lubricate the rubber gasket of the new filter, and install it.
4. Add New Oil: Pour in the recommended oil type (typically 0W-20 for Honda Civic) through the oil filler cap, ensuring the correct quantity is added.

3. Inspect and Replace Worn Components

Sub-steps:
1. Check Engine Mounts: Inspect visually for cracks or excessive wear. Replace if necessary.
  - Tools Required: Wrench set, torque wrench
2. Inspect Belts and Hoses: Look for wear or cracks on serpentine belts and hoses. Replace if any damage is found.
3. Exhaust System Check: Tighten any loose bolts and replace any damaged sections of the exhaust if leaks are found.

4. Test Drive

Sub-steps:
1. Start the engine and listen for noise.
2. Drive the vehicle under various conditions to ensure noise is resolved.