why is my Honda Civic making a hissing noise when I turn

Honda Civic 10th Generation (2016-2021)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

496 words

Problem Statement

Learn how to diagnose and fix hissing noise when turning in Honda Civic. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the hood to avoid burns.

Symptoms

•Hissing noise when turning the steering wheel
•Difficulty steering or increased effort required
•Fluid leakage under the vehicle
•Check engine light illuminated
•Steering wheel vibrations

Diagnostic Steps

1
Inspect power steering fluid level in the reservoir.
2
Check for visible leaks around power steering hoses and connections.
3
Listen for noise at the power steering pump while turning the steering wheel.
4
Inspect the condition of the power steering belt for wear or damage.
5
Scan the vehicle's computer for any related error codes using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Screwdrivers
•Fluid funnel
•Torque wrench

Parts Required

•Power steering fluid
•Power steering hoses
•Power steering belt

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect power steering fluid level in the reservoir.
2
Check for visible leaks around power steering hoses and connections.
3
Listen for noise at the power steering pump while turning the steering wheel.
4
Inspect the condition of the power steering belt for wear or damage.
5
Scan the vehicle's computer for any related error codes using an OBD-II scanner.

Solution

1. Preparation

Gather necessary tools and materials.
Ensure the vehicle is parked on a flat surface and the engine is cool.
Wear safety gloves and goggles.

2. Check and Refill Power Steering Fluid

Open the hood and locate the power steering fluid reservoir.
Remove the cap and check the fluid level against the recommended marks.
If low, add the appropriate type of power steering fluid as specified in the owner’s manual.

3. Inspect and Repair Leaks

Visually inspect the power steering hoses and connections for any signs of wear or leaks.
If any leaks are detected, replace the damaged hoses or fittings.
Ensure all connections are tight and secure to prevent future leaks.

4. Inspect and Replace the Power Steering Belt

Locate the power steering belt and check for signs of fraying, cracking, or excessive wear.
If damaged, loosen the tensioner and remove the old belt.
Install a new belt, ensuring it is properly aligned and tensioned according to manufacturer specifications.

5. Test Power Steering System

Start the engine and turn the steering wheel slowly from lock to lock.
Listen for any hissing noise and check for fluid leaks around the repaired areas.
If the noise persists, consider replacing the power steering pump.