FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why is my Honda Civic 10th Generation (2016-2021) AC compressor continuously running - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/why is my Honda Civic 10th Generation (2016-2021) AC compressor continuously running

why is my Honda Civic 10th Generation (2016-2021) AC compressor continuously running

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
560 words

Problem Statement

Learn how to diagnose and fix the continuously running AC compressor in Honda Civic 10th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before accessing engine components.

Symptoms

  • •Continuous operation of the AC compressor
  • •Insufficient cooling from the air conditioning system
  • •Unusual noises from the compressor
  • •Increased engine load and potential overheating
  • •Frequent cycling of the AC system

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Refrigerant gauge set
  • •Multimeter
  • •Screwdriver set
  • •Fuse tester

Parts Required

  • •AC control module (if faulty)
  • •AC pressure switch (if faulty)
  • •AC relay (if faulty)
  • •Refrigerant (if levels are low)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Check Refrigerant Levels
  • Tools Required: Refrigerant gauge set
  • Connect the refrigerant gauges to the low and high-pressure service ports.
  • Check the pressure readings against the manufacturer’s specifications.
    • If low, add refrigerant; if high, check for blockages.
  • Safety Warning: Handle refrigerant with care and wear gloves.
3. Inspect AC Control Module
  • Tools Required: Multimeter, screwdriver set
  • Remove the dashboard panel to access the AC control module.
  • Use a multimeter to check the voltage at the module connectors.
  • If the module is faulty, replace it with a new unit.
4. Test AC Pressure Switch
  • Tools Required: Multimeter
  • Locate the AC pressure switch (usually near the receiver/drier).
  • Disconnect the wiring harness and test for continuity across the switch terminals.
  • Replace the switch if it fails to operate within specifications.
5. Verify AC Relay and Fuse
  • Tools Required: Multimeter, fuse tester
  • Locate the AC relay in the fuse box and remove it.
  • Test the relay for continuity using a multimeter.
  • Check the fuse associated with the AC system for any blown fuses and replace if necessary.