why does my Honda Civic make a loud noise when turning the wheel

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

488 words

Problem Statement

Learn how to diagnose and fix loud noise when turning the steering wheel in Honda Civic. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the power steering reservoir.

Symptoms

•Loud grinding, popping, or clicking noise when turning the steering wheel
•Difficulty in steering or a feeling of resistance
•Vibration in the steering wheel during turns
•Uneven tire wear
•Fluid leaks under the vehicle

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible leaks in the power steering system.
3
Examine the CV joints and boots for damage or wear.
4
Inspect the suspension components, including struts and control arms.
5
Test drive the vehicle to replicate the noise while turning.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Jack and jack stands
•Pliers
•Funnel

Parts Required

•Power steering fluid
•CV joint (if replacement is necessary)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to avoid any electrical issues during repairs.

2. Inspect and Replace Power Steering Fluid

Tools Required: Socket set, funnel, power steering fluid
Sub-steps:
1. Locate the power steering reservoir under the hood.
2. Remove the cap and check the fluid level. If low, top off with the recommended power steering fluid.
3. If the fluid is dark or contaminated, drain the old fluid and replace it with fresh fluid.

3. Check and Replace CV Joints

Tools Required: Jack, jack stands, socket set, pliers
Sub-steps:
1. Lift the front of the vehicle using a jack and secure it with jack stands.
2. Remove the front wheels to gain access to the CV joints.
3. Inspect the CV boots for tears and the joints for play or damage.
4. If damaged, remove the old CV joint and install a new one following the manufacturer's specifications.

4. Inspect and Repair Suspension Components

Tools Required: Socket set, torque wrench
Sub-steps:
1. Examine the struts, control arms, and bushings for wear or damage.
2. Replace any worn-out components as necessary, ensuring all fasteners are torqued to the manufacturer's specifications.