why does my Honda Civic 10th Generation (2016-2021) shake when I brake?

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

401 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the brake system.
•Allow the brakes to cool before working on them to prevent burns.

Symptoms

•Steering wheel vibrates when braking
•Pulsation felt through the brake pedal
•Uneven wear on brake pads
•Worn or warped brake rotors
•Potential noise from the brake system (squeaking or grinding)

Diagnostic Steps

1
Inspect the brake rotors for signs of warping or uneven wear.
2
Check the brake pads for wear and proper thickness.
3
Verify wheel alignment and balance.
4
Examine suspension components for wear or damage.
5
Scan for any related error codes using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Run-out gauge (for rotor inspection)

Parts Required

•New brake rotors
•New brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is off.
Use wheel chocks to prevent movement.

2. Lift the Vehicle

Use a jack to lift the front of the vehicle.
Secure with jack stands for safety.

3. Remove Wheel

Loosen lug nuts using a socket set.
Remove the wheel to access the brake assembly.

4. Inspect and Replace Brake Rotors

Inspect rotors: Check for warping using a run-out gauge.
Replace rotors:
- Remove the caliper by unbolting it from its bracket.
- Remove the old rotor by unbolting it from the hub.
- Install the new rotor and tighten to manufacturer specifications (typically 90-100 lb-ft).

5. Inspect and Replace Brake Pads

Inspect pads: Check thickness and condition.
Replace pads:
- Remove the caliper bracket if necessary.
- Replace old pads with new ones, ensuring they are seated properly.
- Reattach the caliper over the new pads.

6. Reassemble and Lower Vehicle

Reinstall the wheel and hand-tighten lug nuts.
Lower the vehicle and fully tighten lug nuts in a star pattern to manufacturer specifications.

7. Test Drive

Conduct a test drive to ensure the shaking has been resolved and brakes function smoothly.

Tools Required:

Jack and jack stands
Socket set
Torque wrench
Brake cleaner
Run-out gauge (for rotor inspection)

Parts Required:

New brake rotors
New brake pads

Estimated Repair Time: 2-4 hours

Safety Warnings:

Always disconnect the battery before working on the brake system.
Allow the brakes to cool before working on them to prevent burns.