why does my Honda Civic 10th Generation (2016-2021) shake when I accelerate?

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

491 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow engine to cool before working on any components.

Symptoms

•Vibrations felt in the steering wheel during acceleration
•Shaking in the vehicle body or chassis when accelerating
•Unusual noise coming from the engine or transmission
•Decreased acceleration performance
•Steering wheel misalignment or pulling to one side

Diagnostic Steps

1
Inspect tires for uneven wear and proper inflation.
2
Check wheel balance and alignment.
3
Perform a visual inspection of the suspension components for damage or wear.
4
Scan the vehicle’s OBD-II system for error codes related to the engine or transmission.
5
Inspect engine and transmission mounts for deterioration or damage.
6
Test drive the vehicle to replicate the shaking and identify the speed range at which it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Tire pressure gauge
•Jack and jack stands
•Lug wrench
•Wheel balancing machine
•Alignment machine

Parts Required

•Replacement tires (if necessary)
•Suspension components (if damaged)
•Engine or transmission mounts (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear and proper inflation.
2
Check wheel balance and alignment.
3
Perform a visual inspection of the suspension components for damage or wear.
4
Scan the vehicle’s OBD-II system for error codes related to the engine or transmission.
5
Inspect engine and transmission mounts for deterioration or damage.
6
Test drive the vehicle to replicate the shaking and identify the speed range at which it occurs.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Ensure the engine is cool and disconnect the battery for safety.

2. Tire Inspection and Balancing

Sub-steps:
- Check tire pressure using a tire gauge and adjust to manufacturer specifications.
- Inspect tread for uneven wear; replace tires if necessary.
- Remove the front wheels using a lug wrench and inspect for damage.
- Mount wheels on a balancing machine and adjust weights as needed.

3. Suspension Component Inspection

Sub-steps:
- Raise the vehicle using a jack and secure it with jack stands.
- Visually inspect control arms, ball joints, and tie rods for wear or play.
- Replace any damaged suspension components following manufacturer specifications.

4. Engine and Transmission Mount Inspection

Sub-steps:
- Locate the engine and transmission mounts.
- Inspect mounts for cracks, tears, or excessive movement.
- Replace any damaged mounts, ensuring to torque bolts to manufacturer specifications.

5. Wheel Alignment

Sub-steps:
- After any tire or suspension work, perform a four-wheel alignment using an alignment machine.
- Adjust toe, camber, and caster angles as per the manufacturer’s specifications.