why does my Honda Civic 10th Generation (2016-2021) shake during acceleration

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

508 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath.
•Disconnect the battery before working on electrical components.

Symptoms

•Vibrations felt through the steering wheel during acceleration
•Shaking in the seat or floorboard
•Increased noise from the engine or drivetrain
•Possible steering wheel wobble
•Unusual tire wear patterns

Diagnostic Steps

1
Inspect tires for proper inflation and visible damage.
2
Check wheel alignment and balance using appropriate equipment.
3
Scan the vehicle's OBD-II system for error codes related to the drivetrain.
4
Examine the engine and transmission mounts for wear or damage.
5
Inspect the axles and CV joints for signs of wear or damage.
6
Test drive the vehicle to replicate the shaking and note specific conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack
•Jack stands
•Lug wrench
•Alignment rack
•Wheel balancer
•Socket set
•Torque wrench
•Pry bar
•OBD-II scanner

Parts Required

•New tires (if needed)
•Engine/transmission mounts (if damaged)
•CV axle(s) (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for proper inflation and visible damage.
2
Check wheel alignment and balance using appropriate equipment.
3
Scan the vehicle's OBD-II system for error codes related to the drivetrain.
4
Examine the engine and transmission mounts for wear or damage.
5
Inspect the axles and CV joints for signs of wear or damage.
6
Test drive the vehicle to replicate the shaking and note specific conditions.

Solution

1. Preparation

Gather tools and parts for the repair.
Park the vehicle on a flat surface and set the parking brake.
Disconnect the battery if working on electrical components.

2. Tire Inspection and Rotation

Tools Required: Tire pressure gauge, jack, jack stands, lug wrench.
Check tire pressure and inflate to the manufacturer's specifications.
Inspect tires for uneven wear or damage; replace if necessary.
Rotate the tires to ensure even wear and balance.

3. Wheel Alignment and Balancing

Tools Required: Alignment rack, wheel balancer.
Perform wheel alignment using an alignment machine to ensure proper angles.
Balance the wheels using a wheel balancer to eliminate vibrations caused by imbalances.

4. Inspect and Replace Engine/Transmission Mounts

Tools Required: Socket set, torque wrench, pry bar.
Visually inspect mounts for cracks or excessive wear.
If damaged, remove the old mounts by unbolting them from the engine and frame.
Install new mounts, ensuring they are torqued to the manufacturer’s specifications.

5. Inspect CV Axles and Joints

Tools Required: Socket set, pry bar.
Raise the vehicle and visually inspect CV axles and joints for tears or leaks.
If damages are found, remove the axle from the transmission and replace it with a new one, securing it with the appropriate torque.