FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Civic 10th Generation (2016-2021) have low oil pressure - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/why does my Honda Civic 10th Generation (2016-2021) have low oil pressure

why does my Honda Civic 10th Generation (2016-2021) have low oil pressure

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
571 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix low oil pressure in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool completely before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Oil pressure warning light activated
  • •Engine noise (ticking or knocking sounds)
  • •Decreased engine performance
  • •Oil leaks observed around the engine
  • •Poor fuel economy

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Mechanical oil pressure gauge
  • •Socket set
  • •Oil filter wrench
  • •Drain pan

Parts Required

  • •Engine oil (0W-20)
  • •Oil filter
  • •Oil pan gasket (if oil pump inspection requires pan removal)
  • •Oil pump (if necessary)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts necessary for the job.
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Disconnect the battery for safety.
2. Change Engine Oil and Filter

  1. Drain Old Oil

    • Place a drain pan under the oil pan.
    • Remove the drain plug using a socket set and let the oil drain completely.
    • Reinstall the drain plug and torque it to the manufacturer specification (usually around 20 ft-lbs).

  2. Replace Oil Filter

    • Use an oil filter wrench to remove the old oil filter.
    • Apply a thin layer of new engine oil to the rubber seal of the new oil filter.
    • Install the new oil filter by hand, tightening it to the manufacturer's specification (usually hand-tight).

  3. Add New Oil

    • Remove the oil filler cap and add the recommended engine oil (usually 0W-20 for Honda Civic).
    • Check the owner's manual for the exact oil capacity (typically around 4.4 quarts for a complete oil change).
3. Inspect and Replace Oil Pump (if necessary)

  1. Remove the Oil Pan

    • Drain any remaining oil as described in Step 2.
    • Remove the bolts securing the oil pan and gently pry it off, ensuring no damage to the gasket.

  2. Inspect Oil Pump

    • Locate the oil pump, which is typically mounted on the front of the engine.
    • Inspect for wear or damage; if faulty, replace with a new pump.

  3. Reassemble

    • Replace the oil pan with a new gasket and torque the bolts to the specified torque.
    • Reconnect the battery.