what does it mean when my Honda Civic 10th Generation (2016-2021) TPMS light is on

Honda Civic 10th Generation (2016-2021)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

458 words

Problem Statement

Learn how to diagnose and fix the TPMS light issue in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow the tires to cool before measuring pressures to avoid inaccurate readings.

Symptoms

•TPMS warning light illuminated on the dashboard
•Fluctuations in tire pressure readings
•Rough ride due to low tire pressure
•Decreased fuel efficiency
•Increased tire wear

Diagnostic Steps

1
Check all tire pressures with a reliable tire pressure gauge.
2
Inspect tires visually for any signs of damage or punctures.
3
Verify the TPMS sensors are functioning correctly using an OBD-II scanner.
4
Look for any stored error codes related to the TPMS in the vehicle's computer.
5
Reset the TPMS system through the vehicle’s menu or by following the reset procedure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner
•Tire inflator

Parts Required

•TPMS sensors (if faulty)
•Valve stems (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check all tire pressures with a reliable tire pressure gauge.
2
Inspect tires visually for any signs of damage or punctures.
3
Verify the TPMS sensors are functioning correctly using an OBD-II scanner.
4
Look for any stored error codes related to the TPMS in the vehicle's computer.
5
Reset the TPMS system through the vehicle’s menu or by following the reset procedure.

Solution

1. Preparation

Gather necessary tools: tire pressure gauge, OBD-II scanner, and a tire inflator.
Ensure the vehicle is parked on a level surface and the tires are cold for accurate pressure readings.

2. Check Tire Pressures

Remove valve caps from all tires.
Use the tire pressure gauge to measure the pressure in each tire.
Compare readings to the manufacturer's recommended tire pressure (usually found on the driver's side door jamb).
Inflate or deflate tires as necessary to reach the recommended pressure.

3. Inspect Tires

Visually check each tire for signs of damage, such as cuts, bulges, or embedded objects.
Look for uneven wear patterns that could indicate alignment or suspension issues.

4. Verify TPMS Functionality

Connect the OBD-II scanner to the vehicle’s diagnostic port.
Retrieve any fault codes specific to the TPMS.
If codes are present, follow manufacturer guidelines to address specific faults.

5. Reset TPMS

With the vehicle running, navigate to the TPMS reset menu on the dashboard display (consult the owner's manual for exact instructions).
Follow prompts to reset the system, which may involve driving the vehicle for a short distance to recalibrate.