my Honda Civic 10th Generation (2016-2021) rearview camera not working what to do

Honda Civic 10th Generation (2016-2021)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

496 words

Problem Statement

Learn how to diagnose and fix the rearview camera issue in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to avoid shock or short circuits.

Symptoms

•Rearview camera display is blank or not activating
•Error message or warning on the infotainment screen
•Backup sensors may or may not be functioning
•Image appears distorted or flickering
•No sound or alert when reversing

Diagnostic Steps

1
Inspect the camera lens for any physical obstructions or damage.
2
Check the vehicle's fuse box for a blown fuse related to the rearview camera.
3
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the camera system.
4
Verify the connections behind the camera and on the infotainment unit for any loose or damaged wiring.
5
Test the camera voltage with a multimeter to ensure proper power is being supplied.
6
Check for updates or resets needed in the infotainment system settings.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdriver

Parts Required

•Replacement camera (if damaged)
•Replacement fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the camera lens for any physical obstructions or damage.
2
Check the vehicle's fuse box for a blown fuse related to the rearview camera.
3
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the camera system.
4
Verify the connections behind the camera and on the infotainment unit for any loose or damaged wiring.
5
Test the camera voltage with a multimeter to ensure proper power is being supplied.
6
Check for updates or resets needed in the infotainment system settings.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner, multimeter, socket set, and screwdriver.
Ensure the vehicle is parked on a level surface and the ignition is off.
Disconnect the negative battery terminal to prevent electrical shock.

2. Inspect and Clean Camera

Locate the rearview camera mounted on the back of the vehicle.
Clean the camera lens with a soft cloth to ensure no dirt or debris is obstructing the view.
If the camera is damaged, proceed to replace it.

3. Check and Replace Fuse

Locate the fuse box, typically under the dashboard or in the engine compartment.
Identify the fuse related to the rearview camera (refer to the fuse diagram).
If the fuse is blown, remove it using a fuse puller and replace it with a new fuse of the same amperage.

4. Repair or Replace Wiring

Remove the rear trim panel to access the camera wiring if necessary.
Inspect the wiring for any signs of wear, corrosion, or disconnections.
Repair any damaged wiring or replace the connector if needed.

5. Reconnect Battery and Test

Reconnect the negative battery terminal.
Turn on the ignition and test the rearview camera by shifting into reverse.
Verify that the camera activates and displays correctly on the infotainment screen.