FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) has low oil pressure warning light on, what to do - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/my Honda Civic 10th Generation (2016-2021) has low oil pressure warning light on, what to do

my Honda Civic 10th Generation (2016-2021) has low oil pressure warning light on, what to do

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
641 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix low oil pressure warning in Honda Civic 10th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Allow the engine to cool before working on the oil system.
  • •Disconnect the battery before performing electrical work.

Symptoms

  • •Low oil pressure warning light illuminated on the dashboard
  • •Engine making unusual noises (ticking or knocking)
  • •Decreased engine performance or power
  • •Oil leaks visible under the vehicle
  • •Engine overheating
  • •Poor fuel economy

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Mechanical oil pressure gauge
  • •Oil filter wrench
  • •Socket set
  • •Oil drain pan
  • •Funnel

Parts Required

  • •Engine oil
  • •Oil filter
  • •Oil drain plug washer (if applicable)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to ensure safety while working on the vehicle.
2. Check and Top Off Engine Oil
  • Tools Required: Oil container, funnel, dipstick
  • Remove the dipstick, wipe it clean, and reinsert it to check the oil level.
  • If the oil level is low, add the appropriate type of engine oil as specified in the owner’s manual.
  • Recheck the oil level to ensure it’s within the recommended range.
3. Inspect and Replace Oil Filter
  • Tools Required: Oil filter wrench, socket set, oil drain pan
  • Place the oil drain pan under the oil filter.
  • Use the oil filter wrench to remove the old oil filter.
  • Apply a thin layer of new oil to the rubber gasket of the new oil filter.
  • Install the new oil filter, ensuring it is properly seated and tightened.
4. Replace Engine Oil
  • Tools Required: Socket set, oil drain pan, funnel
  • Remove the oil drain plug using a socket set and allow the old oil to drain into the pan completely.
  • Replace the oil drain plug and tighten it to the manufacturer's torque specifications.
  • Pour the recommended type and quantity of new engine oil into the engine using a funnel.
5. Test Oil Pressure
  • Tools Required: Mechanical oil pressure gauge
  • Remove the oil pressure switch/sensor using a socket set.
  • Install the mechanical oil pressure gauge in its place.
  • Start the engine and observe the oil pressure reading. It should be within the normal range as specified in the service manual.
  • If the pressure is low, the oil pump may need to be inspected or replaced.
6. Reassemble and Test
  • Reinstall any removed components and reconnect the battery.
  • Start the engine and monitor for the low oil pressure warning light.
  • Check for any oil leaks around the oil filter and drain plug.