how to troubleshoot the door ajar light on my Honda Civic 10th Generation (2016-2021) that won’t tur...

Honda Civic 10th Generation (2016-2021)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

546 words

Problem Statement

Learn how to troubleshoot and fix the door ajar light issue in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow doors to remain open while working to avoid accidental closure.

Symptoms

•Door ajar light remains illuminated on the dashboard
•Doors may lock or unlock intermittently
•Chime alert may sound when the vehicle is in motion
•Difficulty locking the doors using the key fob
•Possible drain on the vehicle's battery due to light being on

Diagnostic Steps

1
Inspect each door for physical obstructions or misalignment that may cause the switch to remain activated.
2
Use an OBD-II scanner to check for any fault codes related to door sensors.
3
Manually open and close each door, listening for any unusual sounds from the door latch mechanisms.
4
Check the wiring and connectors at each door latch for damage or corrosion.
5
Test the door ajar switches with a multimeter to ensure they are functioning correctly.
6
Inspect the vehicle’s Body Control Module (BCM) for any software issues or faults.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Trim removal tools
•Screwdriver set

Parts Required

•Door ajar switch (if faulty)
•Wiring connectors (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect each door for physical obstructions or misalignment that may cause the switch to remain activated.
2
Use an OBD-II scanner to check for any fault codes related to door sensors.
3
Manually open and close each door, listening for any unusual sounds from the door latch mechanisms.
4
Check the wiring and connectors at each door latch for damage or corrosion.
5
Test the door ajar switches with a multimeter to ensure they are functioning correctly.
6
Inspect the vehicle’s Body Control Module (BCM) for any software issues or faults.

Solution

1. Preparation

Gather necessary tools and components for the repair.
Ensure the vehicle is parked on a flat surface and the ignition is turned off.
Disconnect the battery to prevent any electrical shock or short circuit during the repair.

2. Inspect Door Latches

Remove the interior door panel of each affected door using a socket set and trim removal tools.
Locate the door latch mechanism and inspect for damage or misalignment.
Clean any debris from the latch area and ensure it operates freely.

3. Test and Replace Door Ajar Switches

Disconnect the wiring harness from the door ajar switch.
Use a multimeter to test for continuity in the switch. If there is no continuity when the door is closed, replace the switch.
To replace, remove the old switch by unscrewing or unclipping it, then install the new switch and reconnect the wiring harness.

4. Check Wiring and Connectors

Inspect all wiring leading to the door latch and switches for frays, breaks, or corrosion.
Repair or replace any damaged wiring as necessary, ensuring all connections are secure.

5. Reassemble and Test

Reattach the interior door panel, ensuring all clips and screws are properly secured.
Reconnect the vehicle's battery.
Test each door to ensure that the door ajar light turns off when the doors are closed.