how to reset the tire pressure monitoring system in Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

10-15 minutes

Time

easy

Difficulty

medium

Severity

2 min read

363 words

Problem Statement

Step-by-step guide to reset the tire pressure monitoring system (TPMS) in Honda Civic 10th Generation (2016-2021). Ensure accurate tire pressure readings.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface while performing the reset.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings
•Warning message displayed on the vehicle's information screen

Diagnostic Steps

1
Ensure all tires are inflated to the recommended pressure levels.
2
Turn the ignition to the 'ON' position without starting the engine.
3
Locate the TPMS reset button, typically found beneath the steering wheel or in the glove compartment.
4
Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
5
Start the engine and allow the vehicle to run for 20 minutes to complete the reset process.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No specific tools required

Parts Required

•No parts required for resetting TPMS

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure all tires are inflated to the recommended pressure levels.
2
Turn the ignition to the 'ON' position without starting the engine.
3
Locate the TPMS reset button, typically found beneath the steering wheel or in the glove compartment.
4
Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
5
Start the engine and allow the vehicle to run for 20 minutes to complete the reset process.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure all tires are properly inflated to the specifications found on the driver’s door jamb.

2. Reset TPMS

Turn the ignition key to the “ON” position without starting the engine.
Locate the TPMS reset button, which is often found under the steering wheel or in the glove compartment.
Press and hold the TPMS reset button until the TPMS warning light blinks three times.
Release the button.

3. Finalize Reset

Start the engine and allow the vehicle to run for approximately 20 minutes.
This allows the TPMS to recalibrate and recognize the tire pressure levels.