how to reset the maintenance light on my Honda Civic 10th Generation (2016-2021)?

Honda Civic 10th Generation (2016-2021)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

372 words

Problem Statement

Learn how to reset the maintenance light on your Honda Civic 10th Generation (2016-2021) with this step-by-step guide. Easy instructions for a quick fix.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the infotainment screen
•Engine oil change notification (if applicable)

Diagnostic Steps

1
Ensure the vehicle is turned off and the key is removed from the ignition.
2
Insert the key into the ignition or press the start button without pressing the brake pedal (to turn on the electrical system).
3
Locate the trip meter reset button on the dashboard.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Sit in the driver's seat and ensure all doors are closed.
Insert the key into the ignition or press the start button (without starting the engine) to power the vehicle's electrical system.

2. Access Maintenance Light Reset

Press the trip meter reset button repeatedly until the trip meter display shows "Odo" (odometer).

3. Reset the Maintenance Light

With the "Odo" displayed, press and hold the trip meter reset button.
While holding the button, turn the ignition to the "ON" position (do not start the engine).
Continue to hold the trip meter reset button until the maintenance light starts blinking and then turns off, which may take about 10 seconds.

4. Finalizing the Reset

Release the trip meter reset button once the light turns off.
Turn off the ignition and then start the engine to ensure the maintenance light remains off.