how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 10th Generation (2016-2021)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

298 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 2012-2015. Step-by-step guide with diagnostic steps and safety tips included.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position and the engine is off during the procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder notification for scheduled maintenance displayed
•No changes in vehicle performance or operation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the gas pedal fully three times within 10 seconds.
3
Check that the maintenance light goes off after the third pedal press.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is in a safe location with the engine off.
Gather necessary tools: none required for this procedure.

2. Ignition Position

Insert the key into the ignition or ensure the vehicle is in the "ON" position (for push-start models, press the start button without pressing the brake pedal).
Confirm that the dashboard lights, including the maintenance light, are illuminated.

3. Resetting the Light

Fully depress the gas pedal three times in quick succession within 10 seconds.
Observe the dashboard; the maintenance light should turn off.

4. Final Check

Turn the ignition off and then back on to ensure the maintenance light remains off.