how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 10th Generation (2016-2021)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

336 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Ensure your vehicle is ready for the next maintenance.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position and the parking brake is engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Potential confusion regarding when the next maintenance is due
•No impact on vehicle performance, but indicates maintenance is needed

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the gas pedal three times within 5 seconds.
3
Turn the ignition switch to the 'OFF' position.
4
Turn the ignition back to the 'ON' position to check if the maintenance light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required specifically for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked in a safe location.
Gather tools such as a flathead screwdriver (if needed for access to the OBD-II port).

2. Access the Ignition

Sit in the driver's seat and ensure the vehicle is in "Park" or "Neutral."
Ensure all doors are closed to prevent any distractions.

3. Reset the Maintenance Light

Turn the ignition switch to the "ON" position (do not start the engine).
Quickly press the gas pedal three times within 5 seconds.
Turn the ignition switch to the "OFF" position.
Turn the ignition back to the "ON" position and verify that the maintenance light is off.