FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 10th Generation (2016-2021)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
389 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2015 Honda Civic 9th Generation. Step-by-step guide for a quick and easy reset.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and the engine is off during the reset process.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •Potentially indicating overdue service or maintenance tasks required
  • •No other warning lights are present on the dashboard

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required.

Parts Required

  • •None required.

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked in a safe and level area.
  • Gather necessary tools: none required for this procedure.
2. Resetting the Maintenance Light
  1. Set the vehicle to the "ON" position without starting the engine:
    • Insert the key and turn it to the "ON" position (do not start the engine).
  2. Adjust the trip meter display:
    • Press the odometer/trip button located on the dashboard until the display shows the odometer reading (not Trip A or Trip B).
  3. Power off the ignition:
    • Turn the key back to the "OFF" position.
  4. Reset the maintenance light:
    • Press and hold the odometer/trip button.
    • While holding the button, turn the ignition back to the "ON" position.
  5. Release the button:
    • Continue holding the button until the maintenance light goes off, usually after about 10 seconds.
  6. Verify the reset:
    • Check that the maintenance light is no longer illuminated.