FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)? - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)?

how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)?

Honda Civic 10th Generation (2016-2021)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
346 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park with the parking brake engaged while performing the reset.

Symptoms

  • •Maintenance light remains illuminated on the dashboard
  • •Reminder notifications for maintenance appear
  • •Vehicle owner wants to clear reminders after service

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface.
  • Gather necessary tools: None required for this reset.
2. Resetting the Maintenance Light

  1. Turn Off the Vehicle:

    • Ensure the ignition is completely off.

  2. Press and Hold the Button:

    • Locate the "Select/Reset" button on the instrument cluster (usually located near the odometer).
    • Press and hold the button.

  3. Ignition On:

    • While holding the button, turn the ignition switch to the "On" position (do not start the engine).

  4. Wait for Reset Confirmation:

    • Continue holding the "Select/Reset" button for approximately 10 seconds or until the maintenance light blinks and then turns off.

  5. Release the Button:

    • Once the light turns off, release the "Select/Reset" button.

  6. Turn Off Ignition:

    • Turn the ignition switch back to the "Off" position.