how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 10th Generation (2016-2021)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

331 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure position and the engine is off before performing any steps.

Symptoms

•Maintenance light is illuminated on the dashboard
•Check engine light may also be present (if unrelated issues exist)
•No other warning lights activated indicating immediate mechanical issues

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the gas pedal three times within 5 seconds.
3
Turn the ignition switch to the 'OFF' position.
4
Start the engine to verify that the maintenance light has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: no specialized tools required.
Ensure the vehicle is parked safely and the engine is off.

2. Turn Ignition On

Insert the key into the ignition and turn it to the "ON" position. Ensure that all dashboard lights are illuminated but do not start the engine.

3. Press Gas Pedal

Quickly press the gas pedal three times within 5 seconds. This step is crucial for triggering the reset sequence.

4. Turn Ignition Off

After pressing the gas pedal, turn the ignition switch to the "OFF" position.

5. Start Engine

Start the engine to confirm that the maintenance light has been successfully reset. The light should no longer be illuminated.