how to reset the maintenance light on Honda Civic 10th Generation (2016-2021)?

Honda Civic 10th Generation (2016-2021)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

315 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 10th Generation (2016-2021) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual) before performing this procedure to avoid any accidents.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or service displayed
•No engine performance issues directly related to the light

Diagnostic Steps

1
Ensure the vehicle is turned off and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Press the gas pedal three times within 5 seconds.
4
Turn the ignition off and then back to the 'ON' position to check if the maintenance light is reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Press the gas pedal three times within 5 seconds.
4
Turn the ignition off and then back to the 'ON' position to check if the maintenance light is reset.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface with the engine off.
Gather necessary tools (if required).

2. Turn Ignition to ON

Insert the key into the ignition.
Turn the key to the "ON" position without starting the engine.

3. Reset Maintenance Light

Quickly press the gas pedal three times within 5 seconds.
Turn the ignition key off.

4. Verify Reset

Turn the ignition back to the "ON" position to confirm that the maintenance light is off.