how to reset the check engine light on Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

393 words

Problem Statement

Learn how to reset the check engine light on Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and instructions.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a stable position and not in gear while working on electrical systems.

Symptoms

•Check engine light illuminated on the dashboard
•Temporary warning messages displayed on the dashboard
•No noticeable performance issues (if no underlying problems exist)

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to determine if any issues need addressing.
2
If no issues are detected, proceed with resetting the check engine light.
3
Verify that the vehicle is in the 'On' position without starting the engine before attempting to reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner
Ensure the vehicle is parked on a level surface, and the ignition is off.
Have the OBD-II scanner ready.

2. Connect OBD-II Scanner

Locate the OBD-II port under the dashboard near the steering column.
Plug the OBD-II scanner connector into the OBD-II port.

3. Turn On Ignition

Turn the vehicle's ignition to the "On" position without starting the engine.
If prompted, select the appropriate vehicle model and year on the scanner.

4. Read and Clear Codes

Use the scanner to read any stored error codes.
If no codes are present or after addressing any identified issues, select the option to "Clear Codes" or "Reset Check Engine Light".
Confirm the action when prompted.

5. Disconnect OBD-II Scanner

Once the codes are cleared, safely disconnect the OBD-II scanner from the port.

6. Verify Reset

Start the vehicle and check if the check engine light remains off.
Monitor the dashboard for any reoccurring warning lights.