how to replace the brake pads on Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

571 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Step-by-step guide on how to replace brake pads on Honda Civic 10th Generation (2016-2021). Learn symptoms, diagnostic steps, and safety tips.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath.
•Avoid touching hot brake components immediately after driving.

Symptoms

•Squeaking or squealing noise during braking
•Reduced braking efficiency
•Vibration or pulsation in the brake pedal
•Warning light on the dashboard
•Grinding noise when brakes are applied
•Increased stopping distance

Diagnostic Steps

1
Inspect the brake pads visually to check for wear indicators.
2
Measure the thickness of the brake pads using a caliper.
3
Check brake fluid level in the reservoir to rule out hydraulic issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Torque wrench
•C-clamp or brake caliper tool
•Brake cleaner
•Bungee cord or rope

Parts Required

•New brake pads
•Brake grease (high-temperature)
•New brake hardware kit (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts required for the replacement.
Ensure the vehicle is parked on a flat surface, and engage the parking brake.
Wear safety gloves and goggles.

2. Gather Tools and Parts

Tools Required:
- Jack and jack stands
- Lug wrench
- Socket set
- Torque wrench
- C-clamp or brake caliper tool
- Brake cleaner
- Bungee cord or rope
Parts Required:
- New brake pads
- Brake grease (high-temperature)
- New brake hardware kit (if necessary)

3. Remove the Wheels

Loosen the lug nuts on the front or rear wheels using the lug wrench.
Raise the vehicle using the jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

4. Remove the Brake Caliper

Locate the brake caliper mounting bolts and remove them using a socket.
Carefully slide the caliper off the brake rotor.
Use a bungee cord to hang the caliper from the suspension, avoiding strain on the brake line.

5. Replace the Brake Pads

Remove the old brake pads from the caliper bracket.
Clean the caliper bracket and rotor with brake cleaner.
Apply brake grease to the back of the new brake pads to prevent squeaking.
Insert the new brake pads into the caliper bracket.

6. Compress the Brake Caliper Piston

Use a C-clamp or brake caliper tool to gently compress the caliper piston back into the caliper housing.
Ensure that the piston is flush with the caliper to allow room for the new pads.

7. Reinstall the Brake Caliper

Slide the caliper over the new brake pads and align it with the bracket.
Reinstall the caliper mounting bolts and tighten them to the manufacturer's specifications (typically around 20-25 ft-lbs).
Repeat the process for the other side if necessary.

8. Reinstall the Wheels

Place the wheel back on the hub and hand-tighten the lug nuts.
Lower the vehicle from the jack stands and to the ground.
Tighten the lug nuts in a star pattern to the manufacturer's torque specifications (typically around 80-90 ft-lbs).