how to fix the screen going black in my Honda Civic 10th Generation (2016-2021)?

Honda Civic 10th Generation (2016-2021)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

508 words

Problem Statement

Learn how to diagnose and fix the black screen issue in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent short circuits or shocks

Symptoms

•Display screen intermittently turning off or going black
•No response from touch inputs when screen is black
•Occasional flickering before going black
•Audio continues to play despite screen being off
•Error messages related to the infotainment system (if applicable)

Diagnostic Steps

1
Check for software updates by verifying if the infotainment system has the latest software version
2
Inspect connections by removing the infotainment unit and checking for loose or damaged wiring connections
3
Perform a system reset by disconnecting the battery for a few minutes or using system reset options
4
Scan for error codes using an OBD-II scanner to check for any stored trouble codes
5
Examine the display for physical damage, including cracks or signs of moisture ingress
6
Test power supply using a multimeter to verify that the infotainment unit is receiving the correct voltage

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Trim removal tool

Parts Required

•Replacement wiring harness (if damaged)
•Software update (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for software updates by verifying if the infotainment system has the latest software version
2
Inspect connections by removing the infotainment unit and checking for loose or damaged wiring connections
3
Perform a system reset by disconnecting the battery for a few minutes or using system reset options
4
Scan for error codes using an OBD-II scanner to check for any stored trouble codes
5
Examine the display for physical damage, including cracks or signs of moisture ingress
6
Test power supply using a multimeter to verify that the infotainment unit is receiving the correct voltage

Solution

1. Preparation

Gather tools: OBD-II scanner, multimeter, socket set.
Disconnect the negative terminal of the battery to ensure safety.

2. Remove Infotainment Unit

Use a trim removal tool to carefully pry off the trim surrounding the infotainment system.
Unscrew the mounting bolts securing the infotainment unit using a socket set.
Gently pull the infotainment unit out, taking care not to damage any connectors.

3. Inspect and Secure Connections

Check all wiring harnesses connected to the infotainment unit for any signs of wear or damage.
Reconnect any loose connectors and ensure they are securely fastened.
If damaged wires are found, repair or replace them as necessary.

4. Update Software (if applicable)

If a software update is available, follow the manufacturer’s instructions to download and install the update to the infotainment system.

5. Reassemble and Test

Slide the infotainment unit back into its mounting location and secure it with screws.
Reattach the trim piece carefully.
Reconnect the negative terminal of the battery.
Turn on the vehicle and check if the screen functions properly.