how to fix the rearview camera on Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

540 words

Problem Statement

Learn how to diagnose and fix rearview camera issues in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems to prevent shorts and shocks.
•Ensure the vehicle is in a stationary position before testing the rearview camera.

Symptoms

•Rearview camera display is blank or dark
•Distorted or unclear image on the display
•Camera image freezes or flickers
•Error message displayed on the infotainment screen
•Inconsistent or no activation of the camera when shifting into reverse

Diagnostic Steps

1
Inspect the camera lens for dirt or obstructions.
2
Check the vehicle's fuse box for a blown fuse related to the camera system.
3
Scan the vehicle's computer system using an OBD-II scanner for any diagnostic trouble codes (DTCs).
4
Verify wiring connections and harness integrity leading to the rearview camera.
5
Test the rearview camera with a multimeter to check for proper voltage and continuity.
6
Confirm that the infotainment system is functioning correctly and software is up to date.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdrivers (flathead and Phillips)
•Fuse puller
•Soft cleaning cloth

Parts Required

•Replacement rearview camera (if necessary)
•New fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the camera lens for dirt or obstructions.
2
Check the vehicle's fuse box for a blown fuse related to the camera system.
3
Scan the vehicle's computer system using an OBD-II scanner for any diagnostic trouble codes (DTCs).
4
Verify wiring connections and harness integrity leading to the rearview camera.
5
Test the rearview camera with a multimeter to check for proper voltage and continuity.
6
Confirm that the infotainment system is functioning correctly and software is up to date.

Solution

1. Preparation

Gather necessary tools and components.
Ensure the vehicle is parked on a flat surface and the ignition is turned off.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Clean the Camera

Use a soft, non-abrasive cloth to clean the camera lens if dirty.
Check for any physical obstructions around the camera area.

3. Replace the Fuse (if blown)

Locate the fuse box, typically found under the dashboard or in the engine compartment.
Identify the fuse associated with the rearview camera (refer to the owner's manual).
Use a fuse puller to remove the blown fuse and replace it with a new fuse of the same amperage.

4. Inspect and Repair Wiring

Remove the rear bumper cover if necessary to access the camera wiring harness.
Inspect for any frayed wires, corrosion, or loose connections.
Repair or replace any damaged wiring or connectors as needed.

5. Replace the Rearview Camera

If the camera is faulty, remove it from the mounting bracket.
Disconnect the camera's wiring harness.
Install the new camera by connecting the harness and securing it in the bracket.
Reassemble the rear bumper cover if it was removed.

6. Reconnect Battery and Test

Reconnect the negative battery terminal.
Start the vehicle and shift into reverse to check if the rearview camera activates and displays correctly.