FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the fuel gauge not working in my Honda Civic 10th Generation (2016-2021)? - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/how to fix the fuel gauge not working in my Honda Civic 10th Generation (2016-2021)?

how to fix the fuel gauge not working in my Honda Civic 10th Generation (2016-2021)?

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
627 words

Problem Statement

Learn how to diagnose and fix the fuel gauge issue in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Allow the vehicle to cool before accessing the fuel system
  • •Work in a well-ventilated area to avoid inhaling fuel vapors

Symptoms

  • •Fuel gauge indicates empty despite having fuel in the tank
  • •Fuel gauge fluctuates erratically while driving
  • •Check engine light illuminated
  • •Fuel warning light does not activate when low on fuel
  • •Inconsistent readings after refueling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter

Parts Required

  • •Fuel sender unit (if replacement is necessary)
  • •Fuel pump assembly gasket (if disturbed)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
3 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Disconnect the negative battery terminal to ensure safety during repairs.
  • Tools Required: Socket set, multimeter, OBD-II scanner.
2. Inspect and Test the Fuel Sender Unit

  • Remove the Fuel Pump Access Cover:

    • Locate the access cover for the fuel pump in the trunk or under the rear seat.
    • Remove screws or clips securing the cover and lift it off.

  • Disconnect the Fuel Pump Connector:

    • Carefully unplug the electrical connector from the fuel pump assembly.

  • Test the Fuel Sender:

    • Use a multimeter to check the resistance of the fuel sender unit while moving the float arm.
    • The resistance should change smoothly from empty to full; if it’s stuck or erratic, the sender may need replacement.
3. Inspect Wiring and Connections

  • Visual Inspection:

    • Check the wiring harness connected to the fuel sender for any signs of damage or corrosion.

  • Repair or Replace Wires:

    • If any damaged wires are found, repair them with appropriate connectors or replace the harness if necessary.
4. Replace Fuel Sender Unit (if necessary)

  • Remove the Fuel Pump Assembly:

    • Using a socket set, unscrew the retaining ring holding the fuel pump assembly in place.
    • Carefully lift the assembly out of the tank.

  • Install New Fuel Sender:

    • Replace the old fuel sender with a new one, ensuring it is properly seated.
    • Reinstall the fuel pump assembly into the tank and secure it with the retaining ring.
5. Reconnect Components and Test

  • Reattach the Fuel Pump Connector:

    • Plug the electrical connector back into the fuel pump assembly.

  • Reconnect Battery:

    • Reconnect the negative battery terminal.

  • Test the Fuel Gauge:

    • Turn on the ignition without starting the engine and observe the fuel gauge for proper function.
    • Start the engine and check if the gauge responds correctly while driving.