how to fix my Honda Civic 10th Generation (2016-2021) that shakes when I drive?

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

488 words

Problem Statement

Learn how to diagnose and fix shaking issues in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted and supported before working underneath.
•Disconnect the battery before working on electrical components.

Symptoms

•Steering wheel vibrates at certain speeds
•Car shakes during acceleration
•Uneven tire wear
•Increased road noise
•Check engine light illuminated

Diagnostic Steps

1
Inspect tire condition for uneven wear or damage.
2
Check tire pressure and adjust to manufacturer specifications.
3
Perform a wheel balance test to identify any imbalances.
4
Inspect suspension components for wear or damage.
5
Scan for error codes using an OBD-II scanner to check for any engine or transmission issues.
6
Test drive the vehicle to pinpoint the speed at which shaking occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Wheel balancing machine
•OBD-II scanner

Parts Required

•Replacement tires
•Suspension components

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition for uneven wear or damage.
2
Check tire pressure and adjust to manufacturer specifications.
3
Perform a wheel balance test to identify any imbalances.
4
Inspect suspension components for wear or damage.
5
Scan for error codes using an OBD-II scanner to check for any engine or transmission issues.
6
Test drive the vehicle to pinpoint the speed at which shaking occurs.

Solution

1. Preparation

Gather tools and materials required for the repair.
Park the vehicle on a flat surface and engage the parking brake.
Lift the vehicle using a jack and secure it with jack stands.

2. Tire Inspection and Replacement

Inspect Tires:
- Check for uneven wear patterns, bulges, or punctures.
- If tires are damaged or excessively worn, replace them.
Replace Tires (if necessary):
- Remove the lug nuts using a socket set and take off the tire.
- Install new tires, ensuring they are properly seated on the rim.
- Torque lug nuts to manufacturer specifications (typically around 80-100 ft-lbs).

3. Wheel Balancing

Balance the Wheels:
- Remove the wheel from the hub.
- Mount the wheel on a balancing machine and add weights as necessary to achieve balance.
- Reinstall the balanced wheel on the vehicle.

4. Suspension Inspection and Repair

Inspect Suspension Components:
- Check control arms, struts, and bushings for signs of wear or damage.
- Replace any worn or damaged components.
Reassemble:
- Reinstall any components that were removed during inspection.
- Torque all bolts to manufacturer specifications.

5. Final Inspection

Inspect all work done, ensuring no tools or parts are left in the engine bay or wheel wells.
Lower the vehicle back to the ground.