FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to clean the throttle body on Honda Civic 10th Generation (2016-2021) - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/how to clean the throttle body on Honda Civic 10th Generation (2016-2021)

how to clean the throttle body on Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
525 words

Problem Statement

Learn how to clean the throttle body on Honda Civic 10th Generation (2016-2021) to improve idle stability and throttle response. Step-by-step guide included.

Affected Component
Engine
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the throttle body area.

Symptoms

  • •Rough or unstable idle
  • •Hesitation during acceleration
  • •Poor fuel economy
  • •Check engine light illuminated
  • •Increased emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead screwdriver
  • •Phillips head screwdriver
  • •Throttle body cleaner
  • •Clean microfiber cloths
  • •Safety goggles
  • •Gloves

Parts Required

  • •Throttle body cleaner

Additional Information

Affected Component
Engine
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required:
    • Flathead screwdriver
    • Phillips head screwdriver
    • Throttle body cleaner
    • Clean microfiber cloths
    • Safety goggles
    • Gloves
  • Disconnect the negative battery terminal to prevent electrical shorts.
  • Allow the engine to cool completely before starting.
2. Remove Engine Cover
  • Locate the screws securing the engine cover.
  • Use a Phillips screwdriver to remove the screws.
  • Carefully lift off the engine cover and set it aside.
3. Access the Throttle Body
  • Disconnect the air intake duct by loosening the clamps using a flathead screwdriver.
  • Remove the duct from the throttle body and set it aside.
  • Disconnect any electrical connectors attached to the throttle body by pressing the tabs and pulling them off.
4. Clean the Throttle Body
  • Spray throttle body cleaner onto a microfiber cloth or directly into the throttle body (avoid excessive spraying).
  • With the throttle plate open (manually if necessary), gently clean the inside surfaces, including the throttle plate and edges.
  • Wipe away any carbon buildup thoroughly.
  • Ensure that no cleaner drips into other components during cleaning.
5. Reassemble
  • Reconnect the electrical connectors to the throttle body.
  • Reattach the air intake duct and secure it with the clamps.
  • Place the engine cover back on and secure it with the previously removed screws.
  • Reconnect the negative battery terminal.
6. Final Steps
  • Start the engine and let it idle for a few minutes to allow the ECU to recalibrate.
  • Test drive the vehicle to ensure proper operation.