how to check for a bad wheel bearing on Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

528 words

Problem Statement

Learn how to diagnose and fix a bad wheel bearing on your 10th Generation Honda Civic (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Disconnect the battery before working on electrical components.

Symptoms

•Grinding or humming noise that increases with speed
•Vibration felt through the steering wheel or floor
•Uneven tire wear
•Pulling to one side while driving
•Decreased handling stability during turns

Diagnostic Steps

1
Perform a visual inspection of the wheel and tire assembly for signs of damage or wear.
2
Lift the vehicle using a jack and secure it with jack stands.
3
Spin the wheel by hand to listen for any unusual noises or roughness.
4
Check for play in the wheel by grasping it at the 12 o'clock and 6 o'clock positions and pushing/pulling.
5
Test drive the vehicle to replicate the noise and determine if it's related to speed or turning.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Torque wrench
•Socket set
•Bearing puller
•Bungee cord

Parts Required

•New wheel bearing
•Brake rotor (if damaged)
•Brake caliper hardware (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Perform a visual inspection of the wheel and tire assembly for signs of damage or wear.
2
Lift the vehicle using a jack and secure it with jack stands.
3
Spin the wheel by hand to listen for any unusual noises or roughness.
4
Check for play in the wheel by grasping it at the 12 o'clock and 6 o'clock positions and pushing/pulling.
5
Test drive the vehicle to replicate the noise and determine if it's related to speed or turning.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety while working.

2. Remove Wheel

Use a lug wrench to loosen the lug nuts.
Lift the vehicle with a jack and secure it with jack stands.
Completely remove the lug nuts and take off the wheel.

3. Access Wheel Bearing

Remove the brake caliper by unbolting it from its mount and hanging it securely using a bungee cord.
Remove the brake rotor if necessary by unbolting it from the hub assembly.
Remove the wheel hub assembly if the bearing is press-fit.

4. Inspect and Replace Wheel Bearing

Inspect the wheel bearing for signs of wear or damage such as pitting or excessive play.
If replacement is necessary, press out the old bearing using a bearing puller.
Clean the hub assembly and install the new wheel bearing, ensuring it is seated properly.

5. Reassemble Components

Reinstall the wheel hub assembly and torque it to the manufacturer’s specifications.
Reattach the brake rotor and caliper, ensuring secure fitment.
Reinstall the wheel and hand-tighten the lug nuts.

6. Lower Vehicle and Final Check

Lower the vehicle back to the ground.
Torque the lug nuts to the specified value in a crisscross pattern.
Reconnect the battery.