FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to change air filter on Honda Civic 10th Generation (2016-2021) - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/how to change air filter on Honda Civic 10th Generation (2016-2021)

how to change air filter on Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes
30 minutes
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
434 words

Problem Statement

Step-by-step guide to replacing the air filter in a Honda Civic 10th Generation (2016-2021). Improve engine performance and air quality with this easy fix.

Affected Component
Engine
Estimated Time
30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the engine is off and cool before beginning work.
  • •Use gloves to prevent skin contact with dirt and debris.

Symptoms

  • •Reduced engine performance
  • •Decreased fuel efficiency
  • •Unusual engine noises
  • •Increased emissions
  • •Strong odors from the engine compartment

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead screwdriver
  • •Socket set
  • •Gloves

Parts Required

  • •New air filter (specific to Honda Civic 10th generation)

Additional Information

Affected Component
Engine
Estimated Time
30 minutes
Difficulty
medium
Severity
medium
Tools Required
3 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: Flathead screwdriver or a socket set (depending on the air filter housing design), gloves.
  • Ensure the engine is off and cool before starting.
2. Remove the Air Filter Housing Cover
  • Locate the clips or screws securing the air filter housing cover.
  • Use the screwdriver or socket set to remove any screws or unclip the cover.
  • Carefully lift off the air filter housing cover to expose the air filter.
3. Replace the Air Filter
  • Remove the old air filter from the housing by lifting it straight up.
  • Inspect the air filter compartment for any debris or dirt and clean it if necessary.
  • Take the new air filter and ensure it is the correct size and type for the 10th generation Honda Civic.
  • Place the new air filter into the housing, ensuring it sits evenly and seals properly.
4. Reassemble the Air Filter Housing
  • Reattach the air filter housing cover by aligning it properly.
  • Secure the cover with the original screws or clips, making sure it is tightly fastened.
5. Final Check
  • Double-check that all components are secured and that there are no tools left in the engine bay.
  • Close the hood and start the engine to verify no unusual noises are present.