how do I reset the maintenance light on my Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

365 words

Problem Statement

Learn how to reset the maintenance light on your 2016-2021 Honda Civic 10th Generation. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and secure condition before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the multi-information display
•No other warning lights present

Diagnostic Steps

1
Ensure the vehicle is turned off and the key is removed from the ignition.
2
Insert the key into the ignition without turning it to the 'On' position.
3
Press the gas pedal three times within 10 seconds before turning the ignition to the 'On' position.
4
Turn the ignition to the 'On' position without starting the engine.
5
Observe the maintenance light and check if it resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and the key is removed from the ignition.
2
Insert the key into the ignition without turning it to the 'On' position.
3
Press the gas pedal three times within 10 seconds before turning the ignition to the 'On' position.
4
Turn the ignition to the 'On' position without starting the engine.
5
Observe the maintenance light and check if it resets.

Solution

1. Preparation

Gather necessary tools:
- None required for this procedure.
Ensure the vehicle is in a safe location with the engine off.

2. Reset the Maintenance Light

Ignition Positioning
- Insert the ignition key. (If equipped with push-button start, ensure the engine is off.)
Accelerator Pedal
- Depress the accelerator pedal fully three times within 10 seconds.
Turn Ignition On
- Turn the ignition key to the "On" position (do not start the engine) or press the start button twice without pressing the brake pedal.
Check Maintenance Light
- The maintenance light will blink and then turn off, indicating it has been reset.

3. Verify the Reset

Turn off the ignition completely.
Start the engine to verify that the maintenance light does not illuminate.