FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Honda Civic 10th Generation (2016-2021) traction control light on how to fix - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/Honda Civic 10th Generation (2016-2021) traction control light on how to fix

Honda Civic 10th Generation (2016-2021) traction control light on how to fix

Honda Civic 10th Generation (2016-2021)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
532 words

Problem Statement

Learn how to diagnose and fix the traction control light issue in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Ensure the vehicle is securely lifted if working on wheels or suspension components.

Symptoms

  • •Traction control light illuminated on the dashboard
  • •Reduced traction in slippery conditions
  • •ABS warning light may also be illuminated
  • •Engine performance issues such as loss of power
  • •Unusual wheel spin or skidding during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter

Parts Required

  • •Wheel speed sensor (if faulty)
  • •Traction control switch (if malfunctioning)
  • •Brake fluid

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
3 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Check Wheel Speed Sensors
  • Tools Required: Socket set, multimeter
  • Remove the wheel and tire to access the wheel speed sensor.
  • Inspect the wiring harness and connector for damage.
  • Use a multimeter to check the sensor's resistance; replace if out of specification.
3. Inspect ABS Module
  • Tools Required: OBD-II scanner
  • Reconnect the battery.
  • Use the OBD-II scanner to check for ABS module fault codes.
  • If codes are present, follow the manufacturer’s service manual to troubleshoot specific errors.
4. Verify Traction Control Switch
  • Tools Required: None
  • Check the traction control switch for proper operation.
  • Ensure it is not stuck in the "off" position; replace if malfunctioning.
5. Check Brake Fluid Level
  • Tools Required: None
  • Inspect the brake fluid reservoir and ensure it is at the correct level.
  • If low, top up with the correct type of brake fluid (DOT 3 or DOT 4 as specified).
6. Test Battery and Charging System
  • Tools Required: Multimeter
  • Use a multimeter to measure battery voltage; it should be between 12.4V and 12.7V when the engine is off.
  • If the voltage is low, check the alternator output while the engine is running.