why is my Honda Accord making a grinding noise when I drive

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

467 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise issues in Honda Accord brakes. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before working on the brakes to avoid burns.

Symptoms

•Grinding noise when the vehicle is in motion
•Noise increases with speed
•Possible vibrations felt through the steering wheel
•Decreased braking performance (if related to brakes)
•Uneven tire wear (if related to drivetrain)

Diagnostic Steps

1
Inspect the brake components for wear or damage, including pads and rotors.
2
Check for foreign objects lodged in the brake assembly or wheel wells.
3
Examine the tires for uneven wear or damage that may cause noise.
4
Test the wheel bearings for play or roughness by lifting the vehicle and spinning the wheels.
5
Inspect the driveshaft and CV joints for wear or damage (if applicable).

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack and jack stands
•Brake cleaner
•Pliers

Parts Required

•Brake pads
•Brake rotors (if needed)
•Wheel bearings (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the brake components for wear or damage, including pads and rotors.
2
Check for foreign objects lodged in the brake assembly or wheel wells.
3
Examine the tires for uneven wear or damage that may cause noise.
4
Test the wheel bearings for play or roughness by lifting the vehicle and spinning the wheels.
5
Inspect the driveshaft and CV joints for wear or damage (if applicable).

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
Disconnect the negative battery terminal to ensure safety.

2. Inspect and Replace Brake Components

Sub-steps:
1. Remove the wheel to access the brake assembly. Use a socket set to remove lug nuts.
2. Inspect brake pads for thickness. If less than 1/8 inch, replace the pads.
3. Check the brake rotors for scoring or warping. If damaged, replace the rotors.
4. Reassemble the brakes, ensuring all components are securely fastened.
5. Reinstall the wheel and torque lug nuts to the manufacturer’s specifications (typically 80-100 ft-lbs).

3. Check and Replace Wheel Bearings

Sub-steps:
1. Raise the vehicle and secure it on jack stands.
2. Spin the wheel and listen for grinding noise; if present, proceed to remove the hub assembly.
3. Remove the wheel, then detach the brake caliper and rotor.
4. Use a socket set to remove the hub assembly and inspect the bearings for wear.
5. If worn, replace bearings with new ones and reassemble in reverse order.