FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Accord's oil pressure light keep coming on - Honda Accord
Home/Cars/Honda/Accord/9th Generation (2013-2017)/why does my Honda Accord's oil pressure light keep coming on

why does my Honda Accord's oil pressure light keep coming on

Honda Accord 9th Generation (2013-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
578 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the oil pressure light issue in your Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before draining oil to avoid burns.

Symptoms

  • •Oil pressure warning light illuminated on the dashboard
  • •Engine noise due to inadequate lubrication
  • •Engine stalling or rough idling
  • •Low oil level in the engine
  • •Oil leaks under the vehicle
  • •Increased engine temperature

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Wrench set
  • •Oil filter wrench
  • •Oil pressure gauge
  • •Torque wrench

Parts Required

  • •Oil pressure sending unit
  • •Engine oil (specific to vehicle requirements)
  • •Oil filter

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and materials needed for the repair.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to prevent electrical shorts.
2. Check Oil Level
  • Remove the dipstick and wipe it clean.
  • Reinsert the dipstick fully, then remove it again to check the oil level.
  • If low, add the recommended oil type until the level is at the full mark.
3. Replace Oil Pressure Sending Unit
  • Locate the oil pressure sending unit (usually near the oil filter).
  • Using a wrench, disconnect the electrical connector.
  • Remove the sending unit using a socket wrench.
  • Install the new sending unit, ensuring it is tightened securely.
  • Reconnect the electrical connector.
4. Replace Oil Filter and Oil
  • Drain the engine oil by removing the oil drain plug (use a pan to catch the oil).
  • Remove the old oil filter using an oil filter wrench.
  • Install the new oil filter, lubricating the rubber gasket with a bit of new oil.
  • Reinstall the drain plug and torque it to the manufacturer's specifications (usually around 20 lb-ft).
  • Fill the engine with the appropriate amount and type of new oil.
5. Test Oil Pressure
  • Attach a mechanical oil pressure gauge to the oil pressure sending unit's port.
  • Start the engine and observe the oil pressure reading on the gauge.
  • The reading should be within the manufacturer's specified range (typically 20-60 psi at idle).
6. Reassemble
  • Reconnect the battery and ensure all tools are removed from the engine bay.
  • Start the engine and monitor for any warning lights.