why does my Honda Accord transmission hesitate when accelerating

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

528 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission hesitation in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission.

Symptoms

•Check engine light illuminated
•Slipping sensation during acceleration
•Unusual engine RPM fluctuations
•Delay in response when pressing the accelerator
•Rough or harsh shifting between gears
•Decreased fuel efficiency

Diagnostic Steps

1
Scan the vehicle's onboard computer for error codes using an OBD-II scanner.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission control module and wiring for damage or corrosion.
4
Test the throttle position sensor (TPS) for proper voltage output.
5
Evaluate the performance of the solenoids and valves in the transmission.
6
Conduct a road test to replicate the hesitation and determine specific conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Funnel
•Screwdriver

Parts Required

•Transmission fluid
•Transmission filter (if applicable)
•Transmission pan gasket (if applicable)
•Solenoids (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer for error codes using an OBD-II scanner.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission control module and wiring for damage or corrosion.
4
Test the throttle position sensor (TPS) for proper voltage output.
5
Evaluate the performance of the solenoids and valves in the transmission.
6
Conduct a road test to replicate the hesitation and determine specific conditions.

Solution

1. Preparation

Gather tools and parts for the repair.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to prevent electrical shorts.

2. Transmission Fluid Change

Sub-steps:
1. Locate the transmission drain plug and place a drain pan underneath.
2. Remove the drain plug and allow the old fluid to completely drain.
3. Replace the drain plug and torque it to the manufacturer’s specifications.
4. Refill the transmission with the appropriate type and amount of fluid (refer to the owner’s manual).
Tools Required: Socket set, torque wrench, funnel, transmission fluid.

3. Replace Transmission Filter (if applicable)

Sub-steps:
1. Remove any necessary components to access the transmission filter (e.g., pan).
2. Remove the old filter and inspect the magnet for metal shavings.
3. Install the new filter, ensuring it is seated correctly.
4. Reinstall the transmission pan with a new gasket, torque bolts to specifications.
Tools Required: Socket set, gasket scraper, new transmission filter kit.

4. Inspect and Replace Solenoids (if needed)

Sub-steps:
1. Disconnect the electrical connectors from the solenoids.
2. Remove the solenoids from the transmission valve body.
3. Install new solenoids by reversing the removal process.
Tools Required: Socket set, screwdriver.

5. Reconnect Battery and Test

Sub-steps:
1. Reconnect the battery terminals.
2. Start the vehicle and check for any warning lights.
3. Perform a road test to ensure the hesitation issue is resolved.