why does my Honda Accord shake when I brake

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

526 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on any electrical systems.
•Allow the vehicle to cool before working on brake components.

Symptoms

•Steering wheel vibrates while braking
•Vehicle shakes or shudders when applying brakes
•Uneven brake pad wear
•Potential grinding noise when brakes are applied
•Brake pedal pulsates

Diagnostic Steps

1
Inspect brake pads and rotors for wear or damage.
2
Check for rotor warping using a dial indicator or runout gauge.
3
Examine calipers for proper operation and sticking.
4
Assess suspension components (tie rods, control arms) for wear.
5
Verify wheel alignment and balance.
6
Scan for any brake system-related error codes using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Torque wrench
•Dial indicator or runout gauge
•Bungee cord

Parts Required

•Brake pads
•Brake rotors
•Possibly suspension components

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads and rotors for wear or damage.
2
Check for rotor warping using a dial indicator or runout gauge.
3
Examine calipers for proper operation and sticking.
4
Assess suspension components (tie rods, control arms) for wear.
5
Verify wheel alignment and balance.
6
Scan for any brake system-related error codes using an OBD-II scanner.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is on a level surface and secure it with wheel chocks.
Disconnect the battery to ensure safety.

2. Remove Wheel

Use a lug wrench to loosen the lug nuts slightly.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Pads and Rotors

Inspect brake pads for thickness; replace if they are worn down to the minimum thickness.
Remove the caliper by unscrewing the caliper bolts; support it with a bungee cord to avoid strain on the brake line.
Remove the old rotor by unscrewing any retaining screws and sliding it off the hub.
Install the new rotor and secure with screws if applicable.
Install new brake pads into the caliper bracket.
Reattach the caliper, ensuring it is aligned properly.

4. Inspect Suspension Components

Visually check along the control arms, tie rods, and bushings for any cracks or excessive play.
If any components are worn, replace them accordingly, following the manufacturer’s specifications for torque values.

5. Reassemble and Test

Reinstall the wheel, securing the lug nuts in a star pattern to ensure even tightening.
Lower the vehicle and torque the lug nuts to the manufacturer’s specifications.
Reconnect the battery and perform a test drive to ensure the issue is resolved.