why does my Honda Accord shake when I brake

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

443 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover why your Honda Accord shakes when braking. Follow our detailed guide for symptoms, diagnostics, and repair steps to restore safe braking performance.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Allow brakes to cool before performing inspections or repairs.

Symptoms

•Steering wheel shakes during braking
•Pulsation felt through the brake pedal
•Uneven wear on brake pads
•Vibration in the front end of the vehicle
•Increased stopping distance

Diagnostic Steps

1
Inspect brake pads for uneven wear and thickness.
2
Check brake rotors for warping or uneven surfaces.
3
Examine suspension components for wear or damage.
4
Inspect brake calipers for proper operation and sticking.
5
Verify wheel alignment and balance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Jack
•Jack stands
•Brake pad spreader
•Micrometer
•Rotor resurfacing tool

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a level surface and engage the parking brake.

2. Remove Wheel

Use a jack to lift the vehicle and place jack stands for safety.
Loosen the lug nuts and remove the wheel.
Tools Required: Socket set, jack, jack stands.

3. Inspect and Replace Brake Pads

Remove the brake caliper by unscrewing the bolts and lifting it off the rotor.
Slide out the old brake pads and inspect for wear.
Replace with new pads if worn beyond specifications.
Tools Required: Socket set, brake pad spreader.
Safety Warning: Do not let the caliper hang by the brake line.

4. Inspect and Resurface/Replace Rotors

Check the rotor's thickness with a micrometer; if below minimum specifications, replace.
If the rotor is warped but above minimum thickness, have it resurfaced.
Tools Required: Micrometer, rotor resurfacing tool (if applicable).
Safety Warning: Ensure rotors are cool before handling.

5. Reassemble Components

Reinstall the caliper over the new pads and secure with bolts.
Reattach the wheel and tighten the lug nuts in a star pattern.
Lower the vehicle and remove jack stands.