why does my Honda Accord shake when I brake

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

488 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported before working underneath.
•Allow the brakes to cool if they have been recently used.

Symptoms

•Steering wheel shakes when braking
•Vibration felt through the brake pedal
•Uneven brake wear observed
•Pulsating sensation when applying brakes
•Noise such as grinding or squeaking during braking

Diagnostic Steps

1
Inspect brake rotors for warping or damage.
2
Check brake pads for uneven wear or contamination.
3
Examine wheel bearings for play or damage.
4
Verify tire condition and balance.
5
Assess suspension components for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Brake caliper tool
•Jack and jack stands
•Runout gauge

Parts Required

•Brake rotors
•Brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Wear safety glasses and gloves.

2. Raise the Vehicle

Use a jack to lift the front of the vehicle.
Secure with jack stands to ensure stability.

3. Remove Wheel

Use a socket set to loosen and remove the lug nuts.
Take off the wheel to access the brake components.

4. Inspect and Replace Brake Rotors

Inspect: Check the brake rotors for warping using a runout gauge. If warped beyond manufacturer specifications, replace.
Replace:
1. Remove the caliper by unscrewing the caliper bolts.
2. Suspend the caliper using a wire to avoid stress on the brake line.
3. Remove the rotor by unscrewing any retaining screws and sliding it off the hub.
4. Install the new rotor by aligning it with the hub and securing it.

5. Replace Brake Pads

Remove the old brake pads from the caliper bracket.
Compress the caliper piston using a caliper tool.
Install new brake pads in the caliper bracket.

6. Reassemble Components

Reattach the caliper over the new pads and secure it with bolts.
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to manufacturer specifications.

7. Final Inspection

Pump the brake pedal to ensure proper seating of the pads.
Check for any unusual noises or issues before taking the vehicle for a test drive.