my Honda Accord has a transmission slip when shifting gears, what could it be?

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

563 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slip issues in Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Allow the engine to cool before working on the transmission
•Always disconnect the battery before performing electrical work

Symptoms

•Transmission slipping during acceleration
•Engine RPMs increasing without a corresponding increase in vehicle speed
•Harsh or delayed shifting between gears
•Unusual noises (grinding or whining) during gear changes
•Dashboard warning lights illuminated (e.g., check engine light)
•Fluid leaks under the vehicle

Diagnostic Steps

1
Check the transmission fluid level and condition (color and smell)
2
Scan for error codes using an OBD-II scanner to identify any transmission-related codes
3
Inspect the transmission fluid lines and cooler for leaks or damage
4
Examine the transmission filter for clogs or contamination
5
Test the transmission solenoids for proper operation using a multimeter
6
Perform a visual inspection of the linkage and mounts for signs of wear or damage

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Drain pan
•Funnel
•Wrench set

Parts Required

•Transmission fluid (specific to Honda Accord)
•Transmission filter
•Transmission solenoids (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Transmission slipping during acceleration

•Engine RPMs increasing without a corresponding increase in vehicle speed

•Harsh or delayed shifting between gears

•Unusual noises (grinding or whining) during gear changes

•Dashboard warning lights illuminated (e.g., check engine light)

•Fluid leaks under the vehicle

Diagnostic Steps

1
Check the transmission fluid level and condition (color and smell)
2
Scan for error codes using an OBD-II scanner to identify any transmission-related codes
3
Inspect the transmission fluid lines and cooler for leaks or damage
4
Examine the transmission filter for clogs or contamination
5
Test the transmission solenoids for proper operation using a multimeter
6
Perform a visual inspection of the linkage and mounts for signs of wear or damage

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface and the engine is turned off.
Disconnect the battery to prevent electrical shorts.

2. Check and Replace Transmission Fluid

Tools Required: Torque wrench, funnel, drain pan, socket set.
Sub-steps:
1. Locate the transmission fluid dipstick and remove it.
2. Using the drain pan, remove the transmission pan bolts with the socket set.
3. Allow the old fluid to drain completely into the pan.
4. Replace the transmission filter by removing it from the transmission and installing the new one.
5. Reattach the transmission pan and torque bolts to the manufacturer's specification.
6. Refill the transmission with the recommended type and amount of fluid using the funnel.

3. Inspect and Replace Transmission Solenoids

Tools Required: Multimeter, socket set, torque wrench.
Sub-steps:
1. Locate the transmission solenoids according to the service manual.
2. Disconnect the electrical connectors from the solenoids.
3. Using a multimeter, test the resistance of each solenoid to ensure they are within specification.
4. If any solenoids are faulty, remove them using the socket set and replace them with new units.
5. Reconnect the electrical connectors and ensure they are secure.

4. Adjust Transmission Linkage

Tools Required: Wrench set, torque wrench.
Sub-steps:
1. Inspect the linkage for any signs of wear or misalignment.
2. If necessary, adjust the linkage according to the service manual specifications.
3. Tighten all bolts and nuts to the specified torque values.