how to reset the ABS light on Honda Accord 9th Generation (2013-2017)?

Honda Accord 9th Generation (2013-2017)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

490 words

Problem Statement

Learn how to reset the ABS light on your 2013-2017 Honda Accord. Step-by-step guide with diagnostic procedures and tools required for the fix.

Affected Component

Brakes

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems to prevent accidental shorts
•Ensure the vehicle is securely parked to avoid movement while working

Symptoms

•ABS warning light illuminated on the dashboard
•Possible loss of anti-lock braking functionality
•Potential for increased stopping distances under heavy braking
•Vehicle may exhibit erratic brake pedal feel

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Inspect ABS wheel sensors for damage, dirt, or disconnection
3
Check brake fluid level to ensure it is at the recommended level
4
Inspect ABS fuses in the fuse box to ensure none are blown
5
Perform a road test to see if the ABS light returns after a reset

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Basic hand tools

Parts Required

•Replacement fuses (if applicable)
•Brake fluid (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, multimeter, basic hand tools.
Ensure the vehicle is parked on a flat surface and the ignition is in the "OFF" position.
Disconnect the negative battery cable to reset the system.

2. Resetting the ABS Light

Reconnect Battery:
- Reconnect the negative battery terminal after waiting for approximately 10 minutes.
- Ensure the connection is secure.
Use OBD-II Scanner:
- Connect the OBD-II scanner to the vehicle's diagnostic port, usually located under the dashboard near the steering column.
- Turn the ignition to the "ON" position without starting the engine.
Navigate to ABS Module:
- Access the ABS module through the scanner's menu.
- Select the option to clear or reset the ABS codes.
Confirm Reset:
- Follow the prompts on the scanner to confirm the reset process.
- Wait for the scanner to complete the reset and display a success message.

3. Final Check

Turn the ignition off and then back on to check if the ABS light has turned off.
If the light remains illuminated, further diagnostics may be needed to identify any underlying issues.