how to reset maintenance light on Honda Accord 8th Generation (2008-2012)

Honda Accord 9th Generation (2013-2017)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

336 words

Problem Statement

Learn how to reset the maintenance light on your 2008-2012 Honda Accord. Follow our step-by-step guide for a quick and easy reset procedure.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•No other warning lights are present
•Engine runs smoothly after service

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the gas pedal three times within 5 seconds.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Check if the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key

Parts Required

•None required for resetting the maintenance light

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the gas pedal three times within 5 seconds.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Check if the maintenance light blinks and then turns off.

Solution

1. Preparation

Gather necessary materials: ignition key and preferably a maintenance manual for reference.

2. Access the Ignition

Insert the key into the ignition switch without turning on the engine.

3. Perform the Reset Procedure

Press the Gas Pedal: Firmly press the gas pedal three times within a span of 5 seconds.
Turn Ignition ON: Turn the ignition key to the "ON" position (don't start the engine).
Observe Maintenance Light: Watch for the maintenance light to blink and then turn off.

4. Verify Reset

Turn the ignition off and then start the engine to ensure the maintenance light is no longer illuminated.