how to fix whining noise from power steering pump in Honda Accord 9th Generation (2013-2017)

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

477 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix whining noise from the power steering pump in Honda Accord 2013-2017. Step-by-step guide with symptoms and solutions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow engine to cool before working on the power steering system.

Symptoms

•Whining noise when turning the steering wheel
•Stiffness or resistance when steering
•Fluid leaks around the power steering pump
•Check power steering fluid level warning light illuminated
•Increased steering effort at low speeds

Diagnostic Steps

1
Inspect power steering fluid level using the reservoir dipstick.
2
Check for visible leaks around the power steering pump and hoses.
3
Listen for noise while turning the steering wheel from lock to lock.
4
Inspect the power steering pump for wear or damage.
5
Bleed the power steering system to remove any trapped air.
6
Use an OBD-II scanner to check for related error codes.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Fluid siphon pump
•Screwdrivers

Parts Required

•Honda-approved power steering fluid
•Power steering pump (if replacement is necessary)
•Power steering hoses (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect power steering fluid level using the reservoir dipstick.
2
Check for visible leaks around the power steering pump and hoses.
3
Listen for noise while turning the steering wheel from lock to lock.
4
Inspect the power steering pump for wear or damage.
5
Bleed the power steering system to remove any trapped air.
6
Use an OBD-II scanner to check for related error codes.

Solution

1. Preparation

Gather tools and parts needed.
Ensure the engine is off and cool.
Disconnect the battery for safety.

2. Check Fluid Level

Locate the power steering fluid reservoir.
Remove the cap and check the fluid level; add appropriate power steering fluid if low.
Use only Honda-approved power steering fluid.

3. Inspect and Repair Leaks

Visually inspect hoses and connections for leaks.
If leaks are found, replace defective hoses or seals.
Tighten any loose connections as needed.

4. Bleed the Power Steering System

Fill the power steering reservoir to the recommended level.
Start the engine and turn the steering wheel from lock to lock several times.
Check the fluid level; top off as necessary while bleeding the system.

5. Replace Power Steering Pump (if necessary)

Remove the serpentine belt by loosening the tensioner.
Disconnect hoses from the power steering pump and remove mounting bolts.
Install the new pump and reconnect hoses.
Reinstall the serpentine belt and ensure proper tension.

6. Test the System

Start the engine and check for the whining noise.
Turn the steering wheel to ensure smooth operation without noise.