how to fix my Honda Accord's transmission slipping when accelerating

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

519 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission.

Symptoms

•Transmission slips during acceleration
•Delayed or harsh shifting
•Engine RPMs increase without corresponding vehicle speed
•Check engine light illuminated
•Fluid leaks under the vehicle
•Unusual noises from the transmission (grinding or whining)

Diagnostic Steps

1
Check the transmission fluid level and condition using the dipstick.
2
Scan the vehicle's computer for any diagnostic trouble codes (DTCs) related to the transmission.
3
Inspect the transmission fluid for contamination or burnt smell.
4
Check the transmission filter for clogs or restrictions.
5
Test the vehicle's throttle position sensor (TPS) for proper voltage output.
6
Examine wiring and connections to the transmission control module (TCM) for damage or corrosion.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Transmission fluid pump
•Funnel
•Socket set
•Torque wrench
•Wrench
•Gasket scraper
•Clean rags
•Multimeter

Parts Required

•Transmission fluid
•Transmission filter
•Gasket for transmission pan

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the transmission fluid level and condition using the dipstick.
2
Scan the vehicle's computer for any diagnostic trouble codes (DTCs) related to the transmission.
3
Inspect the transmission fluid for contamination or burnt smell.
4
Check the transmission filter for clogs or restrictions.
5
Test the vehicle's throttle position sensor (TPS) for proper voltage output.
6
Examine wiring and connections to the transmission control module (TCM) for damage or corrosion.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a level surface and the engine is cool.
Wear safety gloves and goggles.

2. Check and Replace Transmission Fluid

Tools Required: Transmission fluid pump, funnel, socket set, torque wrench.
Remove the transmission drain plug and allow fluid to drain into a suitable container.
Inspect the drained fluid for debris or discoloration.
Replace the drain plug and torque it to the manufacturer’s specifications.
Refill the transmission with the correct type of fluid using a pump and funnel until it reaches the proper level on the dipstick.

3. Replace Transmission Filter

Tools Required: Socket set, wrench, gasket scraper, clean rags.
Remove the transmission pan by unscrewing all bolts and carefully prying it off.
Remove the old filter and replace it with a new one.
Clean the transmission pan and the sealing surface on the transmission.
Apply a new gasket and reinstall the pan, tightening the bolts to the specified torque.

4. Inspect and Repair Electrical Connections

Tools Required: Multimeter, wiring diagram.
Use a multimeter to check the voltage at the throttle position sensor and the transmission control module.
Repair any damaged wiring or corroded connectors found during inspection.
Ensure all electrical connections are secure.