how to fix Honda Accord transmission jerking during shifts

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

563 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission pan.

Symptoms

•Jerking or harsh shifting between gears
•Delayed engagement when shifting from park to drive
•Check engine light illuminated
•Unusual noises when changing gears (clunking or grinding)
•Fluid leaks under the vehicle
•Poor acceleration or power loss

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Check the transmission fluid level and condition; look for signs of contamination or burnt smell.
3
Inspect the transmission fluid cooler lines for leaks or damage.
4
Perform a visual inspection of the transmission mounts for wear or damage.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Check the condition of the throttle position sensor (TPS) and its connection.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Drain pan
•Funnel

Parts Required

•Transmission fluid
•Transmission filter
•Transmission pan gasket
•Transmission solenoids (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Check the transmission fluid level and condition; look for signs of contamination or burnt smell.
3
Inspect the transmission fluid cooler lines for leaks or damage.
4
Perform a visual inspection of the transmission mounts for wear or damage.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Check the condition of the throttle position sensor (TPS) and its connection.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to avoid electrical shorts.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick and remove it.
2. Check fluid level; if low, add the correct type of transmission fluid (refer to the owner's manual).
3. If the fluid appears dark or burnt, proceed to drain and replace.
4. Place a drain pan under the transmission, remove the drain plug, and let the fluid drain completely.
5. Replace the drain plug and torque it to the manufacturer’s specifications.
6. Refill the transmission with new fluid through the dipstick tube using a funnel.

3. Inspect and Replace Transmission Filter

Sub-steps:
1. Remove the transmission pan by loosening the bolts with a socket set.
2. Carefully detach the pan and clean the mating surface.
3. Replace the old filter with a new one, ensuring it is seated properly.
4. Reinstall the transmission pan and torque the bolts to specifications.

4. Test and Replace Transmission Solenoids (if needed)

Sub-steps:
1. Locate the transmission solenoids based on the service manual.
2. Disconnect the wiring harness connected to the solenoids.
3. Use a multimeter to check each solenoid for proper resistance values.
4. Replace any solenoids that do not meet specifications.

5. Reconnect Battery and Test Drive

Reconnect the battery terminals.
Start the engine and allow it to reach operating temperature.
Perform a test drive to confirm the jerking issue has been resolved.