how to fix Honda Accord 9th Generation (2013-2017) rearview camera not working

Honda Accord 9th Generation (2013-2017)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

530 words

Problem Statement

Learn how to diagnose and fix the rearview camera issue in Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent shocks or shorts.
•Ensure the vehicle is securely in park and on a flat surface before engaging reverse.

Symptoms

•Rearview camera display is blank or shows a 'Camera System Error' message
•Camera image is distorted or flickering
•Camera does not activate when the vehicle is in reverse
•No sound or warning chime when the vehicle is in reverse
•Associated dashboard warning lights illuminated (if applicable)

Diagnostic Steps

1
Inspect the rearview camera lens for dirt, debris, or damage.
2
Check the vehicle's settings to ensure the rearview camera is enabled.
3
Scan the vehicle’s computer system for any error codes related to the camera.
4
Inspect the wiring and connectors leading to the rearview camera for damage or corrosion.
5
Verify the reverse light operation to ensure the vehicle is properly detecting reverse gear engagement.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Torx screwdriver (if applicable)
•Microfiber cloth
•Glass cleaner
•Multimeter (for electrical testing)

Parts Required

•Replacement rearview camera (if diagnosis indicates failure)
•Wiring harness (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Rearview camera display is blank or shows a 'Camera System Error' message

•Camera image is distorted or flickering

•Camera does not activate when the vehicle is in reverse

•No sound or warning chime when the vehicle is in reverse

•Associated dashboard warning lights illuminated (if applicable)

Diagnostic Steps

1
Inspect the rearview camera lens for dirt, debris, or damage.
2
Check the vehicle's settings to ensure the rearview camera is enabled.
3
Scan the vehicle’s computer system for any error codes related to the camera.
4
Inspect the wiring and connectors leading to the rearview camera for damage or corrosion.
5
Verify the reverse light operation to ensure the vehicle is properly detecting reverse gear engagement.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface, and the ignition is turned off.
Disconnect the negative battery terminal for safety.

2. Inspect and Clean the Camera

Locate the rearview camera mounted at the rear of the vehicle.
Use a microfiber cloth and glass cleaner to clean the lens.
Check for any physical damage; if the lens is cracked, a replacement will be necessary.

3. Check Wiring and Connectors

Remove the rear trim panel to access the camera wiring.
Inspect the wiring harness for frays, breaks, or corrosion.
If any issues are found, repair or replace the damaged wires and connectors.
Ensure all connections are secure and firmly plugged in.

4. Test the Camera Operation

Reconnect the negative battery terminal.
Start the vehicle and engage the reverse gear.
Observe if the rearview camera activates and displays the image correctly.

5. Replace the Camera (if necessary)

If the camera still does not function, remove the camera from the mounting bracket.
Disconnect the wiring harness from the camera.
Install the new rearview camera by connecting the wiring harness and securing it in place.
Reinstall the rear trim panel.