FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix a Honda Accord that won't shift into gear? - Honda Accord
Home/Cars/Honda/Accord/9th Generation (2013-2017)/how to fix a Honda Accord that won't shift into gear?

how to fix a Honda Accord that won't shift into gear?

Honda Accord 9th Generation (2013-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
561 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission issues in Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool before checking transmission fluid to avoid burns.

Symptoms

  • •Engine revs without acceleration
  • •Transmission warning light illuminated
  • •Difficulty shifting from park to drive or reverse
  • •Grinding or clunking noises when attempting to shift
  • •Fluid leaks under the vehicle
  • •Poor acceleration or no movement when in gear

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Transmission fluid
  • •Funnel
  • •Screwdrivers
  • •Torque wrench

Parts Required

  • •Transmission fluid
  • •Transmission filter (if applicable)
  • •Gasket or seal (if leaking)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required:
    • OBD-II scanner
    • Socket set
    • Transmission fluid
    • Funnel
    • Screwdrivers
    • Torque wrench
  • Ensure the vehicle is on a level surface and safely supported with jack stands.
  • Disconnect the battery to prevent any electrical issues.
2. Check Transmission Fluid
  • Locate the transmission dipstick (if equipped).
  • Remove the dipstick and wipe it clean.
  • Reinsert it and remove again to check the fluid level; it should be between the "full" and "add" marks.
  • If low, add the recommended transmission fluid type through the dipstick tube using a funnel.
  • Inspect the fluid for a burnt smell or dark color; if so, a fluid change may be necessary.
3. Scan for Error Codes
  • Connect the OBD-II scanner to the vehicle's diagnostic port.
  • Turn on the ignition without starting the engine.
  • Read any stored error codes related to the transmission.
  • Refer to the service manual for specific codes and recommended actions based on findings.
4. Inspect Gear Linkage
  • Check the shifter for proper movement; ensure it moves freely without obstruction.
  • Inspect the gear linkage for any loose or damaged components.
  • Tighten any loose connections and replace any damaged parts as necessary.
5. Examine Transmission
  • Look for any visible leaks around the transmission pan and seals.
  • If leaks are found, replace the affected gasket or seal.
  • Check for any signs of physical damage, such as cracks or dents in the transmission casing.
6. Reconnect Battery and Test Drive
  • Reconnect the battery terminals.
  • Start the vehicle and attempt to shift through the gears while stationary.
  • If successful, perform a test drive to ensure proper operation.