how to fix a faulty fuel pump relay in Honda Accord 9th Generation (2013-2017)

Honda Accord 9th Generation (2013-2017)

Error Codes

1 hour

Time

medium

Difficulty

high

Severity

3 min read

418 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a faulty fuel pump relay in Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Fuel System

Estimated Time

1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent short circuits.

Symptoms

•Engine cranks but does not start
•No sound from the fuel pump when the ignition is turned on
•Check engine light illuminated
•Intermittent stalling while driving
•Poor fuel economy due to fuel pump not functioning properly

Diagnostic Steps

1
Use an OBD-II scanner to check for any error codes related to the fuel system.
2
Verify the operation of the fuel pump by listening for activation when the ignition is turned to the 'ON' position.
3
Inspect the fuel pump relay fuse for continuity using a multimeter.
4
Remove the fuel pump relay and visually inspect for any signs of damage or corrosion.
5
Test the relay by applying power to the control terminal and checking for continuity between the output terminals.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set

Parts Required

•Fuel pump relay (OEM recommended)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Use an OBD-II scanner to check for any error codes related to the fuel system.
2
Verify the operation of the fuel pump by listening for activation when the ignition is turned to the 'ON' position.
3
Inspect the fuel pump relay fuse for continuity using a multimeter.
4
Remove the fuel pump relay and visually inspect for any signs of damage or corrosion.
5
Test the relay by applying power to the control terminal and checking for continuity between the output terminals.

Solution

1. Preparation

Gather tools and parts: OBD-II scanner, multimeter, socket set, replacement fuel pump relay.
Disconnect the negative battery terminal to ensure safety.

2. Remove the Faulty Relay

Locate the fuel pump relay in the under-hood fuse box (check owner's manual for exact location).
Use a socket set to remove the cover of the fuse box.
Pull the faulty relay straight out of its socket.

3. Install the New Relay

Take the new fuel pump relay and align it with the socket.
Firmly push the relay into place until it clicks.
Replace the fuse box cover securely.

4. Reconnect Battery and Test

Reconnect the negative battery terminal.
Turn the ignition to the "ON" position and listen for the fuel pump to activate.
Attempt to start the engine and monitor its performance.