why is my Honda Accord 10th Generation (2018-2022) shaking when I brake

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

461 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow the brakes to cool before inspecting or working on them.
•Use jack stands for safety when working under the vehicle.

Symptoms

•Steering wheel shakes when braking
•Vehicle shakes or vibrates during braking
•Increased stopping distance
•Brake pedal feels pulsating
•Possible squeaking or grinding noise when braking

Diagnostic Steps

1
Inspect brake pads for wear and damage.
2
Check brake rotors for warping or uneven surfaces.
3
Examine brake calipers for proper function and sticking.
4
Review suspension components for wear or damage.
5
Check wheel alignment and balance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Socket set
•Torque wrench
•Jack
•Jack stands

Parts Required

•Brake pads (if worn)
•Brake rotors (if warped)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Place wheel chocks behind the rear wheels for safety.

2. Remove Wheel

Using a lug wrench, loosen the lug nuts slightly while the wheel is still on the ground.
Lift the front of the vehicle with a jack and secure it with jack stands.
Completely remove the lug nuts and take off the wheel.

3. Inspect Brake Components

Brake Pads:
- Remove the caliper bolts using a socket set.
- Carefully slide the caliper off the rotor.
- Inspect the brake pads for thickness; replace if worn below 3mm.
Brake Rotors:
- Check the rotor surface for warping or grooves using a straight edge.
- If warped, replace the rotor; if slightly worn, consider resurfacing.

4. Reassemble Components

Install new brake pads, ensuring they are oriented correctly.
If replacing the rotor, slide the new rotor onto the hub.
Reinstall the caliper and secure it with the caliper bolts to the manufacturer’s torque specification (usually around 25-30 lb-ft for Honda).

5. Reinstall Wheel

Place the wheel back onto the hub.
Hand-tighten the lug nuts and lower the vehicle.
Torque the lug nuts to the manufacturer’s specification (typically around 80-100 lb-ft).