why is my Honda Accord 10th Generation (2018-2022) making a grinding noise when I drive?

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

465 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always secure the vehicle on jack stands before working underneath.
•Wear safety gear to protect against debris and sharp edges.

Symptoms

•Grinding noise increases with vehicle speed
•Noise occurs during acceleration or deceleration
•Vibration felt through the steering wheel or floor
•Reduced braking efficiency or abnormal brake pedal feel
•Possible warning lights on the dashboard (e.g., brake warning light)

Diagnostic Steps

1
Inspect the brake system for worn brake pads or damaged rotors.
2
Check the wheel bearings for play or damage.
3
Examine the drive axles for signs of wear or damage.
4
Inspect suspension components for any loose or damaged parts.
5
Conduct a test drive to replicate the noise and determine its source.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Jack and jack stands
•Torque wrench
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors (if needed)
•Wheel bearings (if needed)
•Drive axle (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and materials: socket set, jack and jack stands, brake cleaner, torque wrench.
Ensure the vehicle is parked on a level surface, and the engine is off.
Wear safety gloves and goggles.

2. Inspect and Replace Brake Components

Brake Pad Inspection:
- Remove the wheel using a socket set.
- Inspect brake pads for wear; if less than 3mm thick, replace them.
Rotor Inspection:
- Examine the brake rotors for scoring or warping.
- If damaged, either resurface or replace the rotors.

3. Check Wheel Bearings

Wheel Bearing Inspection:
- With the wheel removed, grasp the rotor and shake it. Any play indicates worn bearings.
- If bearings are worn, remove the hub and replace the bearings as necessary.

4. Inspect Drive Axles

Drive Axle Inspection:
- Look for torn CV boots or any signs of grease leakage.
- If damaged, remove the axle using a socket set and replace with a new axle.

5. Reassemble and Test

Reinstall any removed components in reverse order, ensuring all bolts are torqued to manufacturer's specifications.
Reattach the wheel and lower the vehicle.
Conduct a test drive to confirm the grinding noise is resolved.