why does my Honda Accord 8th Generation (2008-2012) shake when braking

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

504 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord 8th Generation (2008-2012). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Allow the brake system to cool before servicing to avoid burns.

Symptoms

•Steering wheel vibration during braking
•Vehicle pulling to one side when braking
•Pulsation felt through the brake pedal
•Unusual noise (grinding or squeaking) during braking
•Increased stopping distance

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for wear and proper installation.
3
Examine suspension components (tie rods, control arms) for play or damage.
4
Verify wheel alignment and balance.
5
Scan for any error codes related to the ABS system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Micrometer
•Brake cleaner
•Wire brush

Parts Required

•Brake rotors
•Brake pads
•Suspension components (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts.
Safely elevate the vehicle using a jack and secure it with jack stands.
Remove the wheel to access brake components.

2. Inspect and Replace Brake Rotors

Inspect Rotors:
- Use a micrometer to measure rotor thickness; compare against manufacturer specifications.
- Look for signs of warping or scoring.
Replace Rotors (if necessary):
- Remove caliper bolts using a socket.
- Detach the caliper and hang it securely (do not let it dangle).
- Remove the old rotor.
- Clean the hub surface with a wire brush.
- Install the new rotor, ensuring it is seated properly.
- Reinstall the caliper and torque bolts to manufacturer's specifications (typically 25-35 ft-lbs).

3. Inspect and Replace Brake Pads

Inspect Pads:
- Check for wear indicators; if they are worn down to the backing plate, replacement is necessary.
Replace Pads (if necessary):
- Remove the caliper bracket if needed.
- Replace old pads with new ones, ensuring they are properly positioned.
- Use brake grease on the back of the pads to prevent noise.
- Reinstall the caliper.

4. Inspect Suspension Components

Check for any loose or damaged suspension parts, such as tie rods and control arms.
Replace any worn or damaged components as necessary.

5. Wheel Alignment and Balance

After replacing components, have the wheels aligned and balanced to ensure proper handling and tire wear.